Any Zotonic system is capable of sending and receiving e-mail messages over SMTP.
Zotonic implements a mailing system for sending text and HTML messages to one or more recipients.
Out of the box, e-mail sending should “just work”.
If you need feedback on messages that have been sent, enable mod_logging which provides an overview of sent/received and bounced messages.
|site||email_from||Set this to the from-address you want to e-mail to appear from, e.g. something like email@example.com.|
|site||email_override||If set, all e-mail messages that get sent from Zotonic will arrive at this address. Usefull if you are testing but don’t want to confuse other people with your test e-mails.|
|site||smtphost||The hostname where you want messages to appear from. Mostly used for bounce message handling and the EHLO handshake. Defaults to the site’s hostname, but can be overriden|
|site||admin_email||E-mail address of the admin user, the address where admin log/debug messages get sent to when using z_email:send_admin/3.|
|site||bounce_email_override||E-mail address where bounces are sent to. Normally a special bounce address is generated. See also the discussion about smtp_bounce_email_override below.|
The z_email:send_admin/3 command actually looks in three different places for determining the admin e-mail address: the config key zotonic.admin_email, then the site.admin_email key, and finally the email property of the admin user (user with id 1).
The file priv/config can be configured to hold any of the configuration options below. They are in effect for every site running in the Zotonic instance.
|smtp_relay||Whether or not to use a SMTP relay host. Boolean value, defaults to false.|
|smtp_relay_host||Host name for the relay server. Defaults to “localhost”.|
|smtp_relay_port||Port number of the SMTP relay host. Defaults to 2525.|
|smtp_host||The hostname for the SMTP relay host, only needed if smtp_relay is enabled.|
|smtp_ssl||Whether or not to use SSL on the relay host, only needed if smtp_relay is enabled.|
|smtp_username||The username for the relay host, only needed if smtp_relay is enabled.|
|smtp_password||The password for the relay host, only needed if smtp_relay is enabled.|
|smtp_no_mx_lookups||Set to true to not do a MX lookup before sending mail. (default: false)|
|smtp_verp_as_from||Use the “from” address as VERP for bounce handling (default: false)|
|smtp_bcc||Optionally send a BCC of every sent to this address|
|email_override||A global e-mail override. The override logic first checks the site override, and then the global override address.|
|smtp_spamd_ip||Optional IP address for a spamassassin host|
|smtp_spamd_port||Optional port number for a spamassassin host|
|smtp_bounce_domain||Which domain to use for bounce VERP messages. Defaults to the smtp domain.|
|smtp_bounce_email_override||The email address for bounce handling. Only use when all else fails (see the paragraph below).|
Recipients of e-mail want a valid sender’s address on the envelope. This section describes how to set your e-mail bounce/sender domain and fixing domain errors when sending e-mail.
You have to think of e-mail as normal snail mail. There is a message and an envelope.
The email_from is the address that is written on the message. It could be anything, and is generally not used when delivering your mail. Just like with snail mail, the postman only looks on the envelope, not on the message.
The address on the envelope is the most important address. It is where your e-mail is returned to when the message can‘t be delivered (so called bounces). Often it is also checked for validity when the e-mail is delivered at a SMTP server.
You need a valid domain for this envelope sender address. The part before the @ is generated by Zotonic and is used for identifying the original message and recipient when the message bounces.
When the generated part is not acceptable then you can force an envelope address by setting the smtp_bounce_email_override option. Setting the bounce/envelop address manually disables Zotonic’s build-in handling of bounces that happen after the e-mail was accepted for delivery by the remote SMTP host.
The bounce e-mail address can also be set on a per-site basis using the site.bounce_email_override configuration. See the site specific settings table above.
It checks in order:
The part before the @ is generated by Zotonic itself, for administration and detection of bounces. A typical sender address on the envelope looks like: firstname.lastname@example.org
Once configured, you can use the following Erlang commands to send e-mail from Zotonic code:
|z_email:send_admin/3||Sends a quick e-mail to the site administrator. Handy to notice the site admin that something is wrong, a job has finished, etc... The e-mail that is used is the admin_email address that is specified in the site’s config file.|
|z_email:send/4||Sends a text message with a subject to a specified recipient.|
|z_email:send_render/4||Renders a template and sends it as a HTML message to a specified recipient.|
In its default configuration, Zotonic starts an SMTP server on port 2525 for receiving e-mail messages. You can write your own code to decide what happens when somebody sends e-mail to the system, by implementing the email_received notification (see below).
The SMTP server is also used to receive bounce messages from other servers, when sending of a message has failed. mod_mailinglist uses this functionality to automatically deactivate invalid e-mail addresses.
To send messages to Zotonic, the domain part of the e-mail address should have an A or MX record which points to the server where Zotonic is able to receive on port 25. This means that you have to add a firewall rule to redirect port 25 to 2525.
If you were to set up e-mail receiving for a site called example.com, you could test if this is working by using the netcat program, like this:
nc example.com 25
Then, you should be greeted by Zotonic in the following way:
220 example.com ESMTP Zotonic 0.9.0
Press ctrl-c to exit.
When receiving an e-mail message, Zotonic looks at the domain part of the e-mail address to determine which Zotonic site is configured to handle this message. It looks at the host and hostalias fields in the site’s config file to match the recipient domain.
When no site matches the e-mails domain, the message is dropped, and a warning logged.
For handling incoming messages in your site, you need a hook in your site module to do something with the received messages, implementing the email_receive notification.
The code in your module looks like this:
observe_email_received(E, _C) -> lager:warning("Email from: ~p: ~p", [E#email_received.from, E#email_received.email#email.subject]), ok.
Export this function and then restart your site. Now, send an e-mail message to any address @example.com, and notice that it arrives in Zotonic:
(email@example.com)9> 20:57:54.174 [warning] Email from: <<"firstname.lastname@example.org">>: <<"Hello!">>
Check in the admin the log and smtp log. When a message bounces back to the Zotonic SMTP server, you will see errors there. A typical error looks like this:
SMTP: bounce: 504 5.5.2 <noreply+mlcm6godbz2cchtgdvom@oeps>: Sender address rejected: need fully-qualified address To: email@example.com (1234) From: <noreply+mlcm6godbz2cchtgdvom@oeps>